" Florentine drop "
The Florentine Drop is without doubt the most famous article in our handicraft Workshop in the world, because its fine lines and beauty is married well always with any taste and any environment. To mount and to remove the glass has been created a joint in the center of one of the main curls to the canopy that allows to widen one of the smaller curls where it ajoins the curve of the glass and to insert the glass - drop with extreme ease for then to close again the joint with a light pressure. The mounting is done with two normal wedges of 1/50'' and two grapevines, included in the kit, that mount to the wall the wrought iron structure. The Drop has a diameter of 7'' 1/5. In the Florentine drop to chain the height is adjustable from 25'' to 45''.

" Florentine drop "
The Florentine Drop is without doubt the most famous article in our handicraft Workshop in the world, because its fine lines and beauty is married well always with any taste and any environment. So many have tried to imitate its line, but nobody has ever succeeded to equalize the quality and the practicality of it both of the glass - drop or of the structure in iron that sustains it. To mount and to remove the glass has been created a joint in the center of one of the main curls to the canopy that allows to widen one of the smaller curls where it ajoins the curve of the glass and to insert the glass - drop with extreme ease for then to close again the joint with a light pressure. The mounting is done with two normal wedges of 1/50'' and two grapevines, included in the kit, that mount to the wall the wrought iron structure. The diameter of the drop is of 5''. In the Florentine drop to chain the height is adjustable from 19'' to 40'' .

" Florentine Lantern " Object of original and light design ideal for inside with high or vaulted ceilings or for outdoor area. The assemblage is effected with two normal wedges of 1/50'' and two grapevines, included in the kit, that mounts to the wall the wrought iron bracket to whose final hook is hooked the lantern. The lamp is changed unscrewing the four present brass nuts above the canopy. Chain lantern. Of original and light design ideal for inside with high or vaulted ceilings or for outdoor overhangs. The mounting is done with a normal wedge of 1/30'' and a grapevine to hook, included in the kit, that in the ceiling must be used for hooking the hook of the chain that is adjustable from 7'' to 28'' 1/2 excludeding lantern (lantern included adjustable from 20'' to 40''). The lamp is changed screwing the four brass nuts above the canopy. 13''x7'' 1/2x13''

" Florentine Lantern " This lantern has been mounted with exceptional success in all the rooms of the house, in the entries, in the kitchens, in the bedrooms and even in some baths beside the mirror. Its line is adapted for any type of furnishing and also in the modern mixture - classical it doesn't find any difficulty in application, rather it is the article preferred by our customers design. In outdoor usage it is successful in the places where the wind is always present and provokes problems of undulation to the lanterns with mobile ring. The mounting is done with two normal wedges of 6mm and two grapevines, included in the kit, that is mounted to the wall. The chain lantern. The chain lantern has a line that is adapted to any type of furnishing. Ideal to mount in the small entries and externally under roofs overhangs. The mounting is done with a normal wedge of 1/30'' and a grapevine to hook, included in the kit, that in the ceiling must be mounted for hooking the hook of the chain that is adjustable from 73'' to 28'' 1/2 excluded lantern (from 18'' 1/5 to 40'' included lantern). 13 ''1/5x8''x12''

" Half lantern" The half lantern and ideal article in places where the space must have reserved and make more possible the passage as the staircases, the entries, the replacements and the small balconies. The mounting is done with two normal wedges of 6mm and two grapevines, included in the kit, that mount to the wall the wrought iron structure. 13'' 1/2x11''x5'' 1/2

" Lamp-post" This Article has its better application in façade to a height of around 3 meters (9 feet) so that to be able to free the light above the whole wall. The bracket mounts to the wall and the three curls that hold the sphere of glass are forged while still warm and worked according to the technique to open as the tail of peacock. The mounting is done with two normal wedges of 8 mms and two grapevines included in the kit. 17'' 1/5x8''x13'' 1/5